wfview v1.50 released. (icom)

Alles over zend(ontvang)ers en toebehoren.
Plaats reactie
Bericht
Auteur
Gebruikersavatar
pa3met
Berichten: 1477
Lid geworden op: 21 apr 2006, 19:09
Roepletters: PA3MET
Locatie: IJsselstein
Contacteer:

wfview v1.50 released. (icom)

#1 Bericht door pa3met »

Hi all.

We are pleased to announce the release of wfview 1.5. This release contains many new features and fixes compared to the last full release (1.1).

They are summarised below:

Interface:
• The spectrum plot now supports an expiring peak-hold mode and a buffered average mode.
• “Top” and “Bot” sliders let the user scale the spectrum data around signals of interest.
• Custom colors for the plots and meter can be defined by the user in the program using a color picker, which includes transparency support and plot “fill” support.
• New Settings tab design with categories
• New “Log” button brings up the program log in-situ. “Send to termbin.com” button will send the log file to termbin.com and give you a URL which you can share.
• New “Radio Status” button shows what you are connected to
• New support for High-DPI screens; interface elements should scale much more gracefully now

Audio:
• Three cross-platform audio backends (Qt Audio, Port Audio, and RT Audio), allowing you to select the best audio for your system.
• Built-in audio stream format converter handles sample rate, channel count, and codec differences seamlessly.
• Three new audio meter choices (TxAudio, RxAudio, and TxRxAudio) let you see the audio levels in real-time, greatly easing the task of setting up good levels on a computer and verifying loopback audio.

Connectivity:
• Greatly enhanced LAN support for radios with built-in ethernet as well when using wfview as a server.
• Wfview can now “mangle” and “de-mangle” the spectrum data for the pseudo-serial port, allowing programs written for different spectrum formats to display the spectrum. For example, N1MM+ logger can show the spectrum of the IC-7610, even if using the ethernet connection.
• Improved support for Hamlib rigctld emulation; supports popular “multicommands” needed for CQRLOG.
• Older radios lacking a PTT command can be used by connecting the RTS signal to the PTT, which is done with many popular computer adapters.


https://forum.wfview.org
https://wfview.org/download
IC7851; IC202S; TH-F7E; MD380; IC7000(+4m); IC7300; IC9700, IC705, X6100

PH7R
Berichten: 1114
Lid geworden op: 26 jan 2020, 16:50
Roepletters: PH7R
Locatie: Veenendaal

Re: wfview v1.50 released. (icom)

#2 Bericht door PH7R »

pa3met schreef: 26 sep 2022, 13:37 Hi all.

We are pleased to announce the release of wfview 1.5. This release contains many new features and fixes compared to the last full release (1.1).

They are summarised below:

https://forum.wfview.org
https://wfview.org/download
Wilde eea proberen maar krijg een error bij installatie:

Cannot start C:\program Files (x86)\wfview\vc_redist.x86.exe/passive/norestart": Process failed to start. Installatie gaat wel door na acceptatie error melding, enig idee?

Edit: probleem al gevonden. Heb een nieuwe versie van MS Visual C++.
De wereld is vol van idioten die niet snappen wat belangrijk is

Gebruikersavatar
pa3met
Berichten: 1477
Lid geworden op: 21 apr 2006, 19:09
Roepletters: PA3MET
Locatie: IJsselstein
Contacteer:

Re: wfview v1.50 released. (icom)

#3 Bericht door pa3met »

hoi,

da's bekend ja, en 't is idd ook zo dat als wfview start je je nergens druk over hoeft te maken.
IC7851; IC202S; TH-F7E; MD380; IC7000(+4m); IC7300; IC9700, IC705, X6100

Plaats reactie