Firmware update IC-705, IC-7300 en IC-9700

Alles over zend(ontvang)ers en toebehoren.
Bericht
Auteur
Gebruikersavatar
pa3kc
Berichten: 1318
Lid geworden op: 29 mar 2011, 21:48
Roepletters: pa3kc
Locatie: Eindhoven

Re: Firmware update IC-705, IC-7300 en IC-9700

#31 Bericht door pa3kc »

Nu nog een update dat de set gelijktijdig 2m/2m of 70cm/70cm of 23cm/23cm kan ontvangen en dat de FM TX audio klinkt als een goedkope analoge radio van 250 euro.

Oeps, dat kan deze radio van 1900 euro niet.

ON4MDW
Berichten: 182
Lid geworden op: 21 apr 2008, 17:30
Roepletters: ON4MDW
Locatie: Geraardsbergen

Re: Firmware update IC-705, IC-7300 en IC-9700

#32 Bericht door ON4MDW »

Ook is er een nieuwe firmware voor de IC 7300 nl 1.41 te downloaden. :D

73

Marc

jan-nl
Berichten: 48
Lid geworden op: 01 dec 2013, 11:12

Re: Firmware update IC-705, IC-7300 en IC-9700

#33 Bericht door jan-nl »

Nieuwe update voor de Icom 7300 versie 141 te DL bij ICOM
73 jan-nl :D

Gebruikersavatar
PA3GNZ, Tjeerd
Berichten: 5109
Lid geworden op: 25 apr 2005, 14:53
Roepletters: PA3GNZ
Locatie: JO22NB
Contacteer:

Re: Firmware update IC-705, IC-7300 en IC-9700

#34 Bericht door PA3GNZ, Tjeerd »

Moderators. Misschien deze 2 topics samenvoegen.

[mod]Topics samengevoegd[/mod]
73, Tjeerd
PA3GNZ / NL-9514


BQC: 461
NTC: 004


https://www.pa3gnz.nl

Gebruikersavatar
Thijzer
Berichten: 1392
Lid geworden op: 25 feb 2011, 10:25

Re: Firmware update IC-705, IC-7300 en IC-9700

#35 Bericht door Thijzer »

pa3kc schreef: 09 jul 2021, 19:07 Nu nog een update dat de set gelijktijdig 2m/2m of 70cm/70cm of 23cm/23cm kan ontvangen en dat de FM TX audio klinkt als een goedkope analoge radio van 250 euro.

Oeps, dat kan deze radio van 1900 euro niet.
Beetje rancune?

Gebruikersavatar
pa3kc
Berichten: 1318
Lid geworden op: 29 mar 2011, 21:48
Roepletters: pa3kc
Locatie: Eindhoven

Re: Firmware update IC-9700 v1.31

#36 Bericht door pa3kc »

Thijzer schreef: 11 jul 2021, 09:08
pa3kc schreef: 09 jul 2021, 19:07 Nu nog een update dat de set gelijktijdig 2m/2m of 70cm/70cm of 23cm/23cm kan ontvangen en dat de FM TX audio klinkt als een goedkope analoge radio van 250 euro.

Oeps, dat kan deze radio van 1900 euro niet.
Beetje rancune?
Teleurgesteld is een betere bewoording althans in mijn geval voor dit geld had ik gewoon meer verwacht.

Dan mogen de radio's nog zo'n mooie sherwood lab resultaten hebben in de praktijk zet een 7300 of een 9700 naast analoge radio's zoals een 7100, 991(A), ftdx3000 etc. die horen zwakkere signalen beter en comfortabeler dan de 7300/9700 in zowel FM als SSB.

Zet een goedkopere 2m/70cm analoge FM doosje naast de 9700 en twee dingen vallen dan direct op:

De zwakkere FM stations zijn beter te ontvangen op het doosje van 2 a 300 euro en de TX audio is veel mooier op het analoge FM doosje.

Qua audio van de 9700 is het zo digitaal als wat op FM zelfs als je Filter 1 hebt geselecteerd en gespeeld hebt met de FM TX audio equalizer settings.
Dit met een handmike en een tafelmike.

Het zijn leuke pret doosjes en de bediening is ook subliem maar ik vind dit wel jammer.

pc1mb
Berichten: 2423
Lid geworden op: 05 sep 2011, 16:30
Roepletters: PC1MB
Locatie: JO22pe

Re: Firmware update IC-705, IC-7300 en IC-9700

#37 Bericht door pc1mb »

Maar het schermpje is zo mooi :wink:

Gebruikersavatar
Thijzer
Berichten: 1392
Lid geworden op: 25 feb 2011, 10:25

Re: Firmware update IC-705, IC-7300 en IC-9700

#38 Bericht door Thijzer »

Dan zou ik 'm toch eens ter garantie aanbieden want ik krijg juist het tegenovergestelde te horen: een heel mooi en natuurgetrouw audio. Ligt ook aan de ontvanger aan de andere kant natuurlijk. Als dat een goedkoop Chinees doosje is, dan klinkt alles blikkerig.

Elke transceiver heeft z'n tekortkomingen en er is altijd wel een model dat die ene functie wél heeft en dan worden alle andere nieuwe features nog wel eens uit het oog verloren of er zijn omstandigheden waaronder de ene beter functioneert dan de andere. Je vooraf verdiepen in de manual én reviews (met name de slechte reviews zijn interessant als je de voor jou relevante punten eruit haalt) voorkomt een hoop teleurstellingen. Ik kocht 'm voor het werken van satellieten en dat doet hij uitstekend en met de spectrumscope was afstemmen nog nooit zo gemakkelijk. Dat geldt ook voor de 7300. Dat de set ook gebruikt wordt voor de lokale repeater is geen schande, al is ie daar qua bediening wat minder geschikt voor.

Anyway, de nieuwe firmware lost een issue op in het waterval display. Fijn dat ze eraan blijven werken.

Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

Re: Firmware update IC-705, IC-7300 en IC-9700

#39 Bericht door PE2AAB »

Er is weer een nieuwe firmware update voor de IC-9700 beschikbaar.

Zie https://www.icomjapan.com/support/firmware_driver/3741
Version 1.40 d.d. 22-3-2023
Changes from Version 1.32

- Added the DV Repeater Monitor function. (You can connect to a DPlus-compatible repeater.)

When monitoring the Destination repeater selected in “TO,” it is necessary to read the Connection IP Address List file.
You can download the Connection IP Address List sample file from here.
- Displays the Receiving (or Transmitting) route icon (RF or TM: Terminal mode or MONI: DV Repeater Monitor) on the RX History Log and QSO Log.
- Displays the Receiving (or Transmitting) route icon (RF or TM: Terminal mode or MONI: DV Repeater Monitor) to the chunk information in the QSO audio file.
- Displays the Receiving route icon (TM: Terminal mode or MONI: DV Repeater Monitor) to the following screens;
RX HISTORY screen
GPS POSITION (RX) screen
QSO audio, PLAY FILES screen
QSO audio, FILE INFORMATION screen
-Improves the CI-V command 1F 01 (DV transmit call sign) so you can set only the “UR” call sign without the other call signs.

-Improved the Terminal/AP Call sign setting of the DV GATEWAY screen can be registered call signs where the seventh character is not blank.

-Fixed a bug that the position of the playback bar could be incorrect when playing back a recorded QSO audio.
'73 Rick, PE2AAB www.pe2aab.nl

Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

Re: Firmware update IC-705, IC-7300 en IC-9700

#40 Bericht door PE2AAB »

Wellicht nog even een aanvulling; ik las een gebruikerservaring over firmware versie 1.40

Niet geverifieerd maar wil hem jullie zeker niet onthouden. Gelukkig kun je ook nog altijd terug naar de vorige versie.
Firmware V1.40 Display of frequency Problem.

On playback of a recorded satellite QSO the transmitted frequency only shows the hundreds of MHz digit. My frequency was 145.958 and on playback the 45.958 is blacked out. So I reverted to the earlier firmware and the problem had gone away so it's not an LCD issue. I've put back V1.40 and again the displayed frequency is 90% obscured. Can anyone report on this?
M0SKM
'73 Rick, PE2AAB www.pe2aab.nl

Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

Re: Firmware update IC-705, IC-7300 en IC-9700

#41 Bericht door PE2AAB »

En nog aanvullende info over het gebruik van de repeaterlist:
Updating the repeater list for the new firmware

The new firmware came with a new repeater list, which is a separate download: https://www.icomjapan.com/support/firmware_driver/3746/

It doesn't come with any instructions (but there are instructions about the update, here: https://www.icomjapan.com/support/manual/2160/), so here are some tips:
First update the firmware, and install the new version of the CS-9700 software that works with the firmware. Then, read the radio, and if you have made any changes to the repeater list, make sure to export them. It would be the easiest to copy any changes to a new sheet, and then export the sheet.

Save the settings on the SD card, unmount it on the radio, put in in a computer, and look for the following folders on the SD Card:
IC-9700\Csv\GpsMemory
IC-9700\Csv\RptList
IC-9700\RptMoni (this one is new)

Put the 9700_USA_Rpt_190304.csv to the RptList, 9700_USA_GPS_190304.csv to the GpsMemory, and RptMoni_sample.csv to the RptMoni.
Unmount the card from the computer, put it back in the radio, go to MENU->Set->SD Card->Import/Export->Import and then do the imports under Repeater List and GPS Memory. After importing each item, the radio will need to be restarted (so 2 restarts for this step).

Then, go to MENU->Set->DV Repeater Monitor Set->Connection IP Address List, and select the RptMoni_sample.csv there.

Afterwards, if you can read the settings with the CS-9700 from the radio, and import the exported changes to the repeater list through it.

Now I just need to figure out how to actually use this feature... :)
Bron: YU1NKA
'73 Rick, PE2AAB www.pe2aab.nl

Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

Re: Firmware update IC-705, IC-7300 en IC-9700

#42 Bericht door PE2AAB »

Icom IC-9700 nieuwe firmware Version 1.42 d.d. 18-05-2023

Changes from Version 1.41
- Improved that when the DV Repeater Monitor function is ON, and the Destination Repeater (TO) is changed, but the Monitor Audio may not change from the Previous Repeater.

https://www.icomjapan.com/support/firmw ... OTZgohbkjc
'73 Rick, PE2AAB www.pe2aab.nl

Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

Re: Firmware update IC-705, IC-7300 en IC-9700

#43 Bericht door PE2AAB »

Icom IC-9700 nieuwe firmware Version 1.43 d.d. 21-07-2023

Changes from Version 1.42
- Fixed a problem in which the [kHz/M-CH] key did not work while operating a memory channel in the Satellite mode.

https://www.icomjapan.com/support/firmw ... d6e9_UTdEI
'73 Rick, PE2AAB www.pe2aab.nl

Gebruikersavatar
PE2AAB
Moderator
Berichten: 7089
Lid geworden op: 12 apr 2005, 19:06
Roepletters: PE2AAB
Locatie: Aalst - Waalre
Contacteer:

Re: Firmware update IC-705, IC-7300 en IC-9700

#44 Bericht door PE2AAB »

Icom IC-9700 nieuwe firmware Version 1.44 d.d. 15-09-2023

Changes from Version 1.43
- Fixed a bug that caused freezing when repeating the Standby/Power ON operation.
- Fixed a bug that caused a delay in responding to the network or disconnection from the RS-BA1 during the Standby/Power ON operation from the RS-BA1.

https://www.icomjapan.com/support/firmware_driver/3930/
'73 Rick, PE2AAB www.pe2aab.nl

Plaats reactie