Indeed very sensitive for metal objects. How is the performance Thierry?
Kees
Shared Apex Loop rx antenne
Re: Shared Apex Loop rx antenne
Hellopa5cw schreef:Indeed very sensitive for metal objects. How is the performance Thierry?
Kees
Well, the Arduino system provokes me a lot of qrm by the microcontroller clock, I need to place ferrites on the power side of the arduino to establish shock self.
Meanwhile my wife offered me the original version SAL 30 MKII for my Christmas
The antenna is currently mounted next to the antenna K9AY
On the performance side the SAL 30 MKII has better directivity performance than the K9AY antenna.
I will resume the study of my project with the arduino a little later
Re: Shared Apex Loop rx antenne
At the bottom of my land
Shared SAL-30 MKII antenna Array Solutions
K9AY antenna Array solutions
Shared SAL-30 MKII antenna Array Solutions
K9AY antenna Array solutions
-
- Berichten: 1472
- Lid geworden op: 14 nov 2007, 18:56
- Roepletters: pa5cw
- Locatie: Pedralba Valencia Spanje
Re: Shared Apex Loop rx antenne
Hi Thierry,
I rebuild my antenna, because I had some rust problems with the connectors.
I have made the salp20 mkII, it works now very good, also less qrm in daytime on low bands.
Ho is your arduino project?
73 Kees PA5CW
I rebuild my antenna, because I had some rust problems with the connectors.
I have made the salp20 mkII, it works now very good, also less qrm in daytime on low bands.
Ho is your arduino project?
73 Kees PA5CW