nieuwe versie jt65-HF-HB9HQX
- ON4RUB
- Berichten: 77
- Lid geworden op: 27 jun 2013, 10:46
- Roepletters: ON4RUB
- Locatie: evergem
- Contacteer:
nieuwe versie jt65-HF-HB9HQX
Versie 3.0 is uit van de bekende jt65-HF-HB9HQX editie
https://sourceforge.net/projects/jt65hf ... p_redirect
https://sourceforge.net/projects/jt65hf ... p_redirect
Re: nieuwe versie jt65-HF-HB9HQX
Bedankt heb hem gelijk geïnstalleerd .weet je ook toevallig of je bij deze ver.het scherm groter kan krijgen.
74 Kees PD4KK.
74 Kees PD4KK.
- elsinga
- Moderator
- Berichten: 3130
- Lid geworden op: 17 mar 2008, 15:05
- Roepletters: PC5E
- Locatie: Heerenveen (JO22xx)
- Contacteer:
Re: nieuwe versie jt65-HF-HB9HQX
Ik gebruik nu nog de fork van een duitse amateur, maar die werkt op mijn laptop niet heel fijn meer. Ik ga deze maar eens proberen, denk ik, ziet er namelijk goed uit.
Weet iemand of JT-Alert hier ook mee om kan gaan? Die meldt namelijk handig of je calls al gewerkt hebt en zo.
Weet iemand of JT-Alert hier ook mee om kan gaan? Die meldt namelijk handig of je calls al gewerkt hebt en zo.
www.PC5E.nl, Robert Elsinga, communicatie enthousiasteling, zendamateur (PC5E/WC5E/SP20EJ), scannerluisteraar, lokaal/regionaal/nationaal/internationaal scout, IT Security Expert
Icom IC7300, Icom IC-7000, X50N (14m asl), Diamond WD330S (sloper, 6-12m asl), Kenwood TH-F7E, 2x Anytone AT-D578UV (base, mobile), 3x Anytone AT-D878UV, MMVDM duplex hotspot, 20x Baofeng BF888S.
Op mijn site o.a. Examenuitwerking N/F, Scannerfrequenties NL e.o, Beginnen met DMR, DMR codeplug maken
Icom IC7300, Icom IC-7000, X50N (14m asl), Diamond WD330S (sloper, 6-12m asl), Kenwood TH-F7E, 2x Anytone AT-D578UV (base, mobile), 3x Anytone AT-D878UV, MMVDM duplex hotspot, 20x Baofeng BF888S.
Op mijn site o.a. Examenuitwerking N/F, Scannerfrequenties NL e.o, Beginnen met DMR, DMR codeplug maken
- ON4RUB
- Berichten: 77
- Lid geworden op: 27 jun 2013, 10:46
- Roepletters: ON4RUB
- Locatie: evergem
- Contacteer:
Re: nieuwe versie jt65-HF-HB9HQX
Kees,pd4kk schreef:Bedankt heb hem gelijk geïnstalleerd .weet je ook toevallig of je bij deze ver.het scherm groter kan krijgen.
74 Kees PD4KK.
je kan idd het scherm niet maximaliseren maar je kan wel de rechterbenedenhoek nog meer naar beneden slepen om op die manier het venster alvast wat "langer" te maken.
- ON4RUB
- Berichten: 77
- Lid geworden op: 27 jun 2013, 10:46
- Roepletters: ON4RUB
- Locatie: evergem
- Contacteer:
Re: nieuwe versie jt65-HF-HB9HQX
Ik werkte vroeger ook met de fork (comfort-versie dacht ik) maar deze werkt toch net wat lekkerder.elsinga schreef:Ik gebruik nu nog de fork van een duitse amateur, maar die werkt op mijn laptop niet heel fijn meer. Ik ga deze maar eens proberen, denk ik, ziet er namelijk goed uit.
Weet iemand of JT-Alert hier ook mee om kan gaan? Die meldt namelijk handig of je calls al gewerkt hebt en zo.
Jt allerts heb ik nog niet echt uitgeprobeerd (moet ik echt wel eens doen)
De HB9HQX versie kan je ook koppelen aan het hrd-logbook en in een apart schermpje kan je als je een station aan het werken bent, zien of je deze dxcc al hebt per band.
- ON4RUB
- Berichten: 77
- Lid geworden op: 27 jun 2013, 10:46
- Roepletters: ON4RUB
- Locatie: evergem
- Contacteer:
Re: nieuwe versie jt65-HF-HB9HQX
opnieuw een nieuwe versie beschikbaar (3.1) met enkele minor updates
https://sourceforge.net/projects/jt65hf ... p_redirect
https://sourceforge.net/projects/jt65hf ... p_redirect
- ON4RUB
- Berichten: 77
- Lid geworden op: 27 jun 2013, 10:46
- Roepletters: ON4RUB
- Locatie: evergem
- Contacteer:
Re: nieuwe versie jt65-HF-HB9HQX
En versie 3.2 is uit met enkele leuke nieuwe functies
https://sourceforge.net/projects/jt65hf ... p_redirect
https://sourceforge.net/projects/jt65hf ... p_redirect
Re: nieuwe versie jt65-HF-HB9HQX
@on4rubON4RUB schreef:En versie 3.2 is uit met enkele leuke nieuwe functies
https://sourceforge.net/projects/jt65hf ... p_redirect
Kan de vorige versie blijven staan?
73
Hans, pa0hop
- ON4RUB
- Berichten: 77
- Lid geworden op: 27 jun 2013, 10:46
- Roepletters: ON4RUB
- Locatie: evergem
- Contacteer:
Re: nieuwe versie jt65-HF-HB9HQX
ja hoor, je kan gewoon de oude versie overschrijven bij installatie.PA0HOP schreef: @on4rub: Kan de vorige versie blijven staan?
73
Hans, pa0hop
Enkele je oude icoontje op je bureaublad moet je manueel verwijderen.
Re: nieuwe versie jt65-HF-HB9HQX
@ON4RUBON4RUB schreef:PA0HOP schreef:
ja hoor, je kan gewoon de oude versie overschrijven bij installatie.
Enkele je oude icoontje op je bureaublad moet je manueel verwijderen.
Tks OM!
73
Hans, PA0HOP
- ON4RUB
- Berichten: 77
- Lid geworden op: 27 jun 2013, 10:46
- Roepletters: ON4RUB
- Locatie: evergem
- Contacteer:
Re: nieuwe versie jt65-HF-HB9HQX
versie 3.5 is uit
https://sourceforge.net/projects/jt65hf ... p_redirect
https://sourceforge.net/projects/jt65hf ... p_redirect
New in version 3.5
- New options (checkable items in menu **Settings**):
- Hide form **Log QSO**. This results in a quicker logging procedure (only one key press or click).
- Use button RR73 instead of RRR and 73. This saves one qso exchange (1 - 2 minutes). Consider focussed button (press the **Enter key** instead of clicking on the appropriate button).
- Log QSO with button 73 or RR73. No need to click on the button **Log QSO** (or press the **Enter key**).
- Display procedure of the date contains a bug. Cause: missing function AnsiToUTF8. This bug is fixed.
- ON4RUB
- Berichten: 77
- Lid geworden op: 27 jun 2013, 10:46
- Roepletters: ON4RUB
- Locatie: evergem
- Contacteer:
Re: nieuwe versie jt65-HF-HB9HQX
versie 4.0 is uit: https://sourceforge.net/projects/jt65hf ... p_redirect
Release 4.0 (2016-11-28)
The following 5 tabs in the "Configuration" window has a new design:
"Log". New tab sheet with 10 tabs (10 different logdatabases or logfiles).
"Internet". New tab sheet with 3 tabs ("Time synchronization", "PSK Automatic Propagation Reporter" and "Weblogs").
"Alert". New arrangement of the 5 panels (side by side instead of one below the other).
"PTT". New arrangement of the 2 panels ("PTT via" and "Settings").
"CAT". New tab sheet with 6 tabs ("Disabled", "OmniRig", "HamLib", "Ham Radio Deluxe", "Commander" and "TRX-Manager").
The combobox "Dial QRG kHz USB" is editable. You can type a new value and set it for CAT with the Tab key or the Enter key. Note: The preferred method of operation is to use the special window for editing the whole list. Open it with menu "Edit" > "Edit Dial QRG".
Hamlib 2 is replaced with Hamlib 3. Now this CAT program works quick and stable. Note: It's no need to install and run Hamlib 3. The program does it for you. If you used Hamlib 2 before, open the configuration window and set your rig (manufacturer and model) again (the two lists has changed).
New CAT program: "TRX-Manager". Note: Replace the file "bandplan.csv" with the file "bandplan_jt65.csv". Start "TRX-Manager" first. The "TRX-Manager" is a combination of a CAT program and a logging program!
New support for 2 additional logging programs: "Swisslog for Windows 5.94" and "TRX-Manager".
Now you can use an ADIF logfile instead of one of the logdatabases (logging programs) or csv logfiles.
A new jt65-hf.dll provides all combinations of "CQ xx mycall mygrid" messages (form CQ AA to CQ ZZ) for a 100% compatibility with the new release of WSJT-X. But at the moment, for transmitting, the program uses only 11 of this combinations, e.g. CQ DX (CQ9DX), CQ NA (E9NA), CQ VE (E9VE). Outdated programs shows the text in the parentheses (pseudo calls: E9AA .. E9ZZ and CQ9DX). Note: If you use a call with a prefix (or suffix), like HB9HQX/P, you can not send this special CQ calls.
The field with the operator name on the mainwindow is editable, even if it is empty. The empty field shows the text "Name" (font color = gray).
A new field on the mainwindow shows the actual value in pixels (dots) per inch (DPI). For the development, i use Medium 125 % = 120 DPI and a fixed font size. This setting on your windows pc has only an influence on the font size in menues and file dialogs (and the size of the icons on your desktop).
For an improved statistical evaluation, the user has the choice between two filter settings: 1. only JT65 (as before) and 2. JT65 + JT9 together. This feature is available for all logfiles and logdatabases except Logger32 and the built in JT65-Log. Note: You can not import JT9 qso data in the JT65-Log or receive (decode) JT9 signals.
New About window with three tabs and three HTML panels.
Edit JT65-Log has a new GUI design. The two large radiogroups has been replaced by two comboboxes.
The two additional windows Information (=Station Infos) and Statistic (=Band statistics) has an improved design with enlarged font size.
The background color of the label "Input" (input level) changes according to the actual value. < 1 % white, 1-2 % green (ideal), 3-5 % yellow (acceptable), > 6 % red (too high).
Release 4.0 (2016-11-28)
The following 5 tabs in the "Configuration" window has a new design:
"Log". New tab sheet with 10 tabs (10 different logdatabases or logfiles).
"Internet". New tab sheet with 3 tabs ("Time synchronization", "PSK Automatic Propagation Reporter" and "Weblogs").
"Alert". New arrangement of the 5 panels (side by side instead of one below the other).
"PTT". New arrangement of the 2 panels ("PTT via" and "Settings").
"CAT". New tab sheet with 6 tabs ("Disabled", "OmniRig", "HamLib", "Ham Radio Deluxe", "Commander" and "TRX-Manager").
The combobox "Dial QRG kHz USB" is editable. You can type a new value and set it for CAT with the Tab key or the Enter key. Note: The preferred method of operation is to use the special window for editing the whole list. Open it with menu "Edit" > "Edit Dial QRG".
Hamlib 2 is replaced with Hamlib 3. Now this CAT program works quick and stable. Note: It's no need to install and run Hamlib 3. The program does it for you. If you used Hamlib 2 before, open the configuration window and set your rig (manufacturer and model) again (the two lists has changed).
New CAT program: "TRX-Manager". Note: Replace the file "bandplan.csv" with the file "bandplan_jt65.csv". Start "TRX-Manager" first. The "TRX-Manager" is a combination of a CAT program and a logging program!
New support for 2 additional logging programs: "Swisslog for Windows 5.94" and "TRX-Manager".
Now you can use an ADIF logfile instead of one of the logdatabases (logging programs) or csv logfiles.
A new jt65-hf.dll provides all combinations of "CQ xx mycall mygrid" messages (form CQ AA to CQ ZZ) for a 100% compatibility with the new release of WSJT-X. But at the moment, for transmitting, the program uses only 11 of this combinations, e.g. CQ DX (CQ9DX), CQ NA (E9NA), CQ VE (E9VE). Outdated programs shows the text in the parentheses (pseudo calls: E9AA .. E9ZZ and CQ9DX). Note: If you use a call with a prefix (or suffix), like HB9HQX/P, you can not send this special CQ calls.
The field with the operator name on the mainwindow is editable, even if it is empty. The empty field shows the text "Name" (font color = gray).
A new field on the mainwindow shows the actual value in pixels (dots) per inch (DPI). For the development, i use Medium 125 % = 120 DPI and a fixed font size. This setting on your windows pc has only an influence on the font size in menues and file dialogs (and the size of the icons on your desktop).
For an improved statistical evaluation, the user has the choice between two filter settings: 1. only JT65 (as before) and 2. JT65 + JT9 together. This feature is available for all logfiles and logdatabases except Logger32 and the built in JT65-Log. Note: You can not import JT9 qso data in the JT65-Log or receive (decode) JT9 signals.
New About window with three tabs and three HTML panels.
Edit JT65-Log has a new GUI design. The two large radiogroups has been replaced by two comboboxes.
The two additional windows Information (=Station Infos) and Statistic (=Band statistics) has an improved design with enlarged font size.
The background color of the label "Input" (input level) changes according to the actual value. < 1 % white, 1-2 % green (ideal), 3-5 % yellow (acceptable), > 6 % red (too high).
Re: nieuwe versie jt65-HF-HB9HQX
Gebruik je deze software in combinatie met HRD voor cat dan kun je beter even wachten. Chrashed bij mij voortdurend.
73, John
73, John
Wie spelfouten vind mag ze houden.